Wake-on-LAN powers on a computer that is shut down or asleep. The wake signal is sent by another online Starix Orbit Host on the same network, so keep at least one Host powered on at each location.
Requirements
- The computer to wake is connected by wired network and plugged into power.
- The computer has the Starix Orbit Host installed, is signed in to an account and has been online once.
- Another Host on the same network is online (same account or same team).
- Both settings below are complete: motherboard (BIOS/UEFI) and Windows.
Step 1: Motherboard settings
Press Del or F2 at startup (it varies by brand; the startup screen shows a prompt) to enter BIOS/UEFI setup, then find and enable Wake-on-LAN. Common names:
| Brand | Option location and name |
|---|---|
| ASUS | Advanced → APM Configuration → set Power On By PCI-E to Enabled |
| MSI | Settings → Advanced → Wake Up Event Setup → set Resume By PCI-E Device to Enabled |
| Gigabyte | Settings → Platform Power → set Wake on LAN to Enabled; set ErP to Disabled |
| ASRock | Advanced → ACPI Configuration → set PCIE Devices Power On to Enabled |
| Dell、HP、Lenovo | Power Management → set Wake on LAN to LAN Only or Enabled |
If the menu has ErP or Deep Sleep, set it to Disabled so the network adapter stays on standby after shutdown. Save the settings and restart.
Step 2: Windows settings
- Right-click the Start button and open "Device Manager".
- Expand "Network adapters" and double-click the wired network adapter.
- "Power Management" tab: select "Allow this device to wake the computer" and "Only allow a magic packet to wake the computer".
- "Advanced" tab: set "Wake on Magic Packet" to "Enabled".
- Open "Control Panel → Power Options → Choose what the power buttons do → Change settings that are currently unavailable" and clear "Turn on fast startup".
Wake the computer
- Sign in to the Account center and open "My devices".
- Click "Wake" in the row of the offline device.
- After one to two minutes the device shows as online and you can connect.
Check that the settings work
- After shutdown, the lights beside the network port stay on or blink, which means the network adapter is on standby.
- Test from sleep first, then from shutdown. If both wake, you are done.
- For laptops, plug in power and a wired network before testing.
Last updated: November 14, 2026
Starix Orbit